cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
809
Views
0
Helpful
5
Replies

WLC not recognized in Campus Manager Topology Map

jeeyishyuan
Level 1
Level 1

Hi Experts,

WLC (4400 series) is not recognized in Campus Manager 5.1.3 Topology Map despite the device state under CM is Managed.

Please advise!!

Thanks!

1 Accepted Solution

Accepted Solutions

Make sure you have SNMPv1 enabled on the WLC. This is not enabled by default.

View solution in original post

5 Replies 5

Joe Clarke
Cisco Employee
Cisco Employee

What does it appear as on the topology map? What is its sysObjectID?

Hi Joe,

It appears as a red box with question mark on the topology. The sys OID is 1.3.6.1.4.1.14179.1.1.4.3

Make sure you have SNMPv1 enabled on the WLC. This is not enabled by default.

But I am using SNMPv2c now...Why SNMPv1 must be enabled?

The version of Campus you have requires it.