cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
835
Views
0
Helpful
1
Replies

WS-C3650-48PS management with CNA 6.3

Eric Pau
Level 1
Level 1

Hi community,

I have a new switch WS-C3650-48PS installed and it holds our VTP domain. I tested to active a suspended VLAN via CNA 6.3 and no error return after the apply button. I press the refresh button again and I found the new setting was not apply to the switch.  I also got the error on the port setting page insides CNA 6.3 . I did not have the same problem on the same CNA on my other Cisco switch.

Is that CNA 6.3 not supporting my new switch ? 

ERic

1 Reply 1

jkilleda
Level 3
Level 3

Hello Eric,

WS-C3650-48PS management with CNA 6.3
With Cisco Network Assistant 6.1.0 you will be able to manage the switch WS-C3650-48PS.

You can check the release notes for the same.

https://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_network_assistant/version6/relnotes/ol32368.html


 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: