02-10-2005 10:01 PM - edited 02-20-2020 11:56 PM
Hi, My 3015 public interface and private interface attachd to a PIX interfaces.
Public connect to PIX DMZ1 (security 50)
Private connect to PIX DMZ2 (security 80)
My RADIUS server is at PIX inside network (security 100)
I have ACL in DMZ2 to allow all IP traffic through PIX and a STATIC (inside, DMZ2) 10.x.x.x 10.x.x.x
My VPN clients connect to the Concentrator no problem. but they cant access the internal LAN resources, with or without split tunneling
I can pin all my LAN resources from VPN 3015 concentrator.
Pls help
Regards
Ranjith
Solved! Go to Solution.
02-13-2005 01:06 AM
Hi Ranjith
what is the ip pool you are configuring on the VPN concentrator ? is it the same as the private IP subnet or a different one ? make sure you have proper routes to the IP pool from the inside network. try assigning a ip address from the same private subnet (since u are already able to ping from the 3015) and try accessing the applications.
let us know..
Raj
02-13-2005 01:06 AM
Hi Ranjith
what is the ip pool you are configuring on the VPN concentrator ? is it the same as the private IP subnet or a different one ? make sure you have proper routes to the IP pool from the inside network. try assigning a ip address from the same private subnet (since u are already able to ping from the 3015) and try accessing the applications.
let us know..
Raj
02-13-2005 02:38 PM
Hi Raj,
Yes, That was a routing issue, on the PIX I had to add the route to ip pool subnet to go via concentrator.
Thanks for your help
Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide