For a small business client, I used the Basic Firewall wizard to set up a High Security firewall as it stands. They're in the medical field and there are very strict patient data laws here. I left it up for several days without committing the changes to the startup.cfg so I could back out of the changes if I had any problems.
The client needs GoToMyPC on one machine (their P2P server machine) until I get the VPN configured, maybe even beyond as an overlap measure. Until they decided to implement a VPN, they've been using GoToMyPC for remote access, mostly for management but also employees. They use a mission critical database software package that keeps an appointment calendar and patient data to which they need remote access.
While GoToMyPC worked initially after the firewall was implemented, it seemd as though it eventually closed remote access down because a few days later I couldn't seem to connect. After rebooting the router (without changes committed), GoToMyPC then worked once again.
Is this my imagination? Was it the firewall or was it probably something else? If because of the firewall, how do I allow the traffic through for this application? And in particular, I just want to allow it now to the one P2P server machine.
BTW. I also allowed remote secure access to router configuration via CCP when I configured the firewall and that seemed to work without problems.
Thanks in advance for any ideas you might offer...
jeremyNLSO
CCNA Routing & Switching, CCNA Security
MCITP, MCTS
Berlin, Germany
ArchiTech89
CCNA Routing & Switching, CCNA Security
MCITP, MCTS
Berlin, Germany
