cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

332
Views
0
Helpful
0
Replies
Highlighted
Beginner

877W block P2P

Hi cisco guru,

Help me please to block (Limit speed) P2P traffic for all network except 1 IP (if it impossible, so for all network)


I've tried to implement policy according this article http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a00801e419a.shtml but unsuccessfull.

#show ver
Cisco IOS Software, C870 Software (C870-ADVIPSERVICESK9-M), Version 12.4(15)T13, RELEASE SOFTWARE (fc3)

#show class-map P2P
Class Map match-any P2P (id 1)
  Description: Limit P2P speed
   Match protocol edonkey
   Match protocol bittorrent
   Match protocol kazaa2
   Match protocol fasttrack file-transfer "*"
   Match protocol gnutella file-transfer "*"

#show policy-map
  Policy Map BLOCK_INTERNET
    Class P2P
      drop

int FastEthernet0
   service-policy input BLOCK_INTERNET

interface Dialer0
  ip nbar protocol-discovery
  service-policy input BLOCK_INTERNET

Sorry guys, it works OK. Packets drops, but I've tried to implement speed limitation:

#show policy-map
  Policy Map BLOCK_INTERNET
    Class P2P
      bandwidth 8

but CBWFQ : Can be enabled as an output feature only

I've tried to add:

int FastEthernet0
   service-policy output BLOCK_INTERNET
interface Dialer0
  ip nbar protocol-discovery
  service-policy output BLOCK_INTERNET

instead previos "input", but new rule doesn't work at all.

Thanks

0 REPLIES 0
Content for Community-Ad