cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

514
Views
0
Helpful
7
Replies
Highlighted

AAA for AIP-SSM-40

Hi,

Can AAA be activated with the IPS module of the ASA (AIP-SSM card). if so, please let me know how?

Thx in advance
Ihssan

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted

Please see the following URL:

http://www.cisco.com/en/US/docs/security/ips/7.1/configuration/guide/idm/idm_setup.html#wp1245416

As stated here, Authentication and Authorization are supported, but Accounting messages aren't sent to the RADIUS backend.

View solution in original post

7 REPLIES 7
Highlighted
Beginner

Cisco IPS devices support authentication of admin users via Radius since the 7.1.4 software release .

Sent from Cisco Technical Support iPad App

Highlighted

I am referring to the AIP-SSM-40 IPS module not the device

Highlighted

Standalone IPS appliances and ASA IPS modules run almost identical software. The RADIUS authentication is available on both, standalone and Asa modules.

Sent from Cisco Technical Support iPad App

Highlighted
Enthusiast

Highlighted

This is for Authentication via a Radius server.

How about Authorization and Accounting. Is it supported on the IPS module of the firewall?

Highlighted

Please see the following URL:

http://www.cisco.com/en/US/docs/security/ips/7.1/configuration/guide/idm/idm_setup.html#wp1245416

As stated here, Authentication and Authorization are supported, but Accounting messages aren't sent to the RADIUS backend.

View solution in original post

Highlighted

Thx for your help

Ihssan

Content for Community-Ad