10-08-2012 01:41 PM - edited 03-11-2019 05:06 PM
Hi
I am having normal network need to add public ip 162.196.212.32/29 with port 51241 in ASA firewall
Kind Regards
10-08-2012 01:55 PM
Hello Majed,
Can you be more specific?
10-08-2012 02:20 PM
I'm having one server with public IP x.x.x.32/29 I need to add this in my firewall asa 5520. so that from outside my network no one can access it.
I want to know how can i do this,shall I add this server directly in my network or create static nat to it and pass through firewall.
As I am new in firewalls
Kind Regards
10-08-2012 02:28 PM
Hello,
So you do not want anyone on the outside world to access that server.
Just put it on your network and make sure you deny all traffic from any user to x.x.x.32.
Regards,
Julio
10-08-2012 02:38 PM
10-08-2012 03:35 PM
Hello Majed,
static (inside,outside) tcp x.x.x32 51241 x.x.x32 51241
access-list Outside_access_in permit tcp specific_outside_hosts host x.x.x.32 eq 51241
Let me know if this is what you are looking for?
10-09-2012 10:59 AM
Hi Carvaja,
Thanks for your help, I got the complete scenario now, I am having one public IP 162.x.x.33 255.255.255.248 which need to be convert in private IP with 172.x.x.25 and port 51241. I need to add this in ASA 5520
Thanks
10-09-2012 11:25 AM
static (inside,outside) tcp x.x.x32 51241 172.x.x.25 51241
access-list Outside_access_in permit tcp specific_outside_hosts host x.x.x.32 eq 51241
10-11-2012 03:16 AM
Thanks,
but the correct syntax was:
access-list Outside_access_in extended permit tcp any host x.x.x.33 eq 51241
static (inside,Outside) x.x.x.33 172.x.x.25 netmask 255.255.255.255
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide