07-20-2016 11:24 PM - edited 03-12-2019 01:02 AM
Hi,
I have 2 qty of ASA5520-AIP20-K9 working in HA with 50 nos of SSL VPN license. I want to increase the SSL VPN count from 50 to 150 on my both firewall.
As there is new licensing available,I have consider below part codes but Iam not sure whether existing firewall will support these licenses. Request if you can help on this.
Bill of Material
Part Number |
Description | Qty |
L-AC-VPNO-100= |
Cisco AnyConnect VPN Only, 100 Simultaneous (eDelivery) | 2 |
L-AC-VPNO-50= | Cisco AnyConnect VPN Only, 50 Simultaneous (eDelivery) | 2 |
CON-SAU-ACVO100 | SW APP SUPP + UPGR Cisco AnyConnect VPN Only, 100 Simultane | 2 |
CON-SAU-ACVO50 | SW APP SUPP + UPGR Cisco AnyConnect VPN Only, 50 Simultaneo | 2 |
Also find below snapshot existing license available in ASA5520-AIP20-K9
Cisco Adaptive Security Appliance Software Version 8.3(2)
Device Manager Version 7.5(2)153
Hardware: ASA5520, 512 MB RAM, CPU Pentium 4 Celeron 2000 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash M50FW080 @ 0xfff00000, 1024KB
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited perpetual
Maximum VLANs : 150 perpetual
Inside Hosts : Unlimited perpetual
Failover : Active/Active perpetual
VPN-DES : Enabled perpetual
VPN-3DES-AES : Enabled perpetual
Security Contexts : 2 perpetual
GTP/GPRS : Disabled perpetual
SSL VPN Peers : 50 perpetual
Total VPN Peers : 750 perpetual
Shared License : Disabled perpetual
AnyConnect for Mobile : Disabled perpetual
AnyConnect for Cisco VPN Phone : Disabled perpetual
AnyConnect Essentials : Disabled perpetual
Advanced Endpoint Assessment : Disabled perpetual
UC Phone Proxy Sessions : 2 perpetual
Total UC Proxy Sessions : 2 perpetual
Botnet Traffic Filter : Disabled perpetual
Intercompany Media Engine : Disabled perpetual
This platform has an ASA 5520 VPN Plus license.
07-21-2016 01:00 PM
Yes your version 8.3.2 ASAs will support the new AnyConnect license types.
On a related note, you should upgrade to a more current release as 8.3(2) is getting quite old.
07-21-2016 09:07 PM
Thanks Marvin.
01-31-2017 03:51 AM
Hello, will it work on 8.25? L-AC-VPNO-50=
Without anyconnect 4 I mean. Maintaining the 3.1 we already have
regards
01-31-2017 04:39 AM
Yes. You can run the image for either AnyConnect 3.x or 4.x clients from your ASA with 8.2(5) software.
Running the 4.x client does require one of the new license types per Cisco's licensing Terms and Conditions; but other than that either type technically works.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide