cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
761
Views
0
Helpful
1
Replies

AIP-SSM re-image stuck at recover status

spencerlin1991
Level 1
Level 1

hi, help me please.

Slot-1 1> Platform ASA-SSM-10
Slot-1 2> GigabitEthernet0/0
Slot-1 3> Link is UP
Slot-1 4> MAC Address: 001f.caf0.2d16
Slot-1 5> ROMMON Variable Settings:
Slot-1 6>   ADDRESS=123.2.2.70
Slot-1 7>   SERVER=123.2.2.10
Slot-1 8>   GATEWAY=0.0.0.0
Slot-1 9>   PORT=GigabitEthernet0/0
Slot-1 10>   VLAN=untagged
Slot-1 11>   IMAGE=IPS-SSM_10-K9-sys-1.1-a-7.1-8-E4.img
Slot-1 12>   CONFIG=
Slot-1 13>   LINKTIMEOUT=20
Slot-1 14>   PKTTIMEOUT=4
Slot-1 15>   RETRY=20
Slot-1 16> tftp IPS-SSM_10-K9-sys-1.1-a-7.1-8-E4.img@123.2.2.10
Slot-1 17> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Slot-1 18> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Slot-1 138> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Slot-1 139> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Slot-1 140> !!!!!!!!!!!!!!
Slot-1 141> Received 40364864 bytes
Slot-1 142> Launching TFTP Image...
Slot-1 143> Cisco Systems ROMMON Version (1.0(11)4) #0: Fri Mar 21 17:35:35 PDT 2008
Slot-1 144> Platform ASA-SSM-10
Slot-1 145> Launching BootLoader...

 

ciscoasa(config)# sh module 

Mod Card Type                                    Model              Serial No. 
--- -------------------------------------------- ------------------ -----------
  0 ASA 5520 Adaptive Security Appliance         ASA5520            removed
  1 ASA 5500 Series Security Services Module-10  ASA-SSM-10         removed

Mod MAC Address Range                 Hw Version   Fw Version   Sw Version     
--- --------------------------------- ------------ ------------ ---------------
  0 001f.9ebc.bfa8 to 001f.9ebc.bfac  2.0          1.0(11)4     8.4(7)26
  1 001f.caf0.2d16 to 001f.caf0.2d16  1.0          1.0(11)4     

Mod SSM Application Name           Status           SSM Application Version
--- ------------------------------ ---------------- --------------------------

Mod Status             Data Plane Status     Compatibility
--- ------------------ --------------------- -------------
  0 Up Sys             Not Applicable         
  1 Recover            Not Applicable      

 

and my PC can ping the ip address of the module.

 

C:\Users\xxx>ping 123.2.2.70

Pinging 123.2.2.70 with 32 bytes of data:
Reply from 123.2.2.70: bytes=32 time=264ms TTL=237
Reply from 123.2.2.70: bytes=32 time=254ms TTL=237
Reply from 123.2.2.70: bytes=32 time=249ms TTL=236
Reply from 123.2.2.70: bytes=32 time=260ms TTL=236

Ping statistics for 123.2.2.70:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss
Approximate round trip times in milli-seconds:
    Minimum = 249ms, Maximum = 264ms, Average = 256ms

1 Reply 1

luis_tushea
Level 1
Level 1

Hi,

I have the same problem... Did you find a solution for the issue?

Thanks

Review Cisco Networking for a $25 gift card