Allowing Multicast traffic to pass through ASA 5510

[Carmine De Rienzo]

I ' m not able to configure the asa 5510 to allow the multicast traffic to pass through ASA.

The multicast traffic have to pass from inside interface to outside interface.

Can I configure the multicast traffic to pass through asa with a static nat ?

Can you send me any configuration examples ?

Thanks a lot

Best Regards

Carmine De Rienzo

[Farrukh Haroon]

Hello

You can do this with a static translation as you mentioned; please see the following link for a complete configuration example:

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807631d2.shtml

Please rate if you find the input helpul; Thanks

Farrukh