01-13-2014 04:46 PM - edited 03-11-2019 08:29 PM
My ASA is 5505 8.4(4)1 and 5515 8.6(1)2
I setup a 5505 and 5515 SSL anyconnect VPN. When the client computer try to connect through https:\\x.x.x.x. It prompt and check up ActiveX and Java, After that It requests to install Cisco AnyConnect Secure Mobility Client. I was succussful connect through anyconnect client.
I would like to know, is that possible NOT to use anyconnect secure client to connect VPN. Only use web browser instead of client software installed?
Solved! Go to Solution.
01-13-2014 06:47 PM
You can configure clientless SSL VPN only if you have purchased AnyConnect Premium licenses on your ASA. You can check your licensed features via "show version" or "show activation-key".
Sent from Cisco Technical Support iPad App
01-13-2014 11:07 PM
License is not an issue as "AnyConnect Premium Peers : 2" allows you two vpn session.
you may check the group policy of this user account to ensure ssl-clientless is configured under vpn-tunnel-protocol.
01-13-2014 06:47 PM
You can configure clientless SSL VPN only if you have purchased AnyConnect Premium licenses on your ASA. You can check your licensed features via "show version" or "show activation-key".
Sent from Cisco Technical Support iPad App
01-13-2014 09:26 PM
Hi Marvin
I have below licenses, but every time i try to connect through web. It going to ask me to download anyconnect client instead of Clientless connection. Do you know why ?
AnyConnect Premium Peers : 2 perpetual
AnyConnect Essentials : Disabled perpetual
Other VPN Peers : 25 perpetual
Total VPN Peers : 25 perpetual
01-13-2014 11:07 PM
License is not an issue as "AnyConnect Premium Peers : 2" allows you two vpn session.
you may check the group policy of this user account to ensure ssl-clientless is configured under vpn-tunnel-protocol.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide