cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

1058
Views
0
Helpful
4
Replies
Highlighted

%ASA-3-713232 Loggin Message

Hi all,

maybe you can help me.

On our firewall arise strange messages out of 2 Users .

I have found Information fragments at Cisco.

But I have not understood what the problem is.

Error of the user:

User 1:

Mar 19 00:00:08 ham-be-asa01.mg.ham.loc/ham-be-asa01.mg.ham.loc %ASA-3-713232: Group = VIAVPNCLIENT, Username = asprdlik, IP = X.X.X.X, SA lock refCnt = 0, bitmask = 00000080, p1_decrypt_cb = 0, qm_decrypt_cb = 0, qm_hash_cb = 0, qm_spi_ok_cb = 0, qm_dh_cb = 0, qm_secret_key_cb = 0, qm_encrypt_cb = 0

User 2:

Mar 19 00:00:18 ham-be-asa01.mg.ham.loc/ham-be-asa01.mg.ham.loc %ASA-3-713232: Group = VIAVPNCLIENT, Username = sspoerer, IP = X.X.X.X, SA lock refCnt = 0, bitmask = 00000080, p1_decrypt_cb = 0, qm_decrypt_cb = 0, qm_hash_cb = 0, qm_spi_ok_cb = 0, qm_dh_cb = 0, qm_secret_key_cb = 0, qm_encrypt_cb = 0

It's always the same users and IP addresses. The messages are repeatedly logged per minute.

_____________________________________________________________________________________________

Explanation @ Cisco:

713232

Error Message    %PIX|ASA-3-713232 SA lock refCnt = value, bitmask = hexvalue, 
p1_decrypt_cb = value, qm_decrypt_cb = value, qm_hash_cb = value, qm_spi_ok_cb = 
value, qm_dh_cb = value, qm_secret_key_cb = value, qm_encrypt_cb = value

Explanation    This message displays all the IKE SA locks and is displayed when a possible error has  been detected. This message reports errors on semaphores used to protect memory violations for  IKE SAs.

value—Decimal value

hexvalue—Hexadecimal value

Recommended Action    Contact TAC and report the error.

_____________________________________________________________________________________________

Thanks in advance for your help;)!

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Cisco Employee

%ASA-3-713232 Loggin Message

Hi Steffen,

I would recommend either opening a TAC case or posting this in the VPN community so the experts there can assist:

https://supportforums.cisco.com/community/netpro/security/vpn

-Mike

View solution in original post

4 REPLIES 4
Highlighted
Cisco Employee

%ASA-3-713232 Loggin Message

Hi Steffen,

I would recommend either opening a TAC case or posting this in the VPN community so the experts there can assist:

https://supportforums.cisco.com/community/netpro/security/vpn

-Mike

View solution in original post

Highlighted

%ASA-3-713232 Loggin Message

Thank you...I made it !

Highlighted

%ASA-3-713232 Loggin Message

Switch to the standby Device, an reboot solved the problem

Highlighted

%ASA-3-713232 Loggin Message

Switch to the standby Device, an reboot solved the problem