Long ago, I set up a couple of ASA 5505s as remote access VPNs. I didn't use the wizard, but created them manually inside ASDM with a bit of research and mucking about.
Later this month, I'll need to take one of these existing 5505s and add a site-to-site VPN. The other end of this VPN will be a brand new 5505 at a brand new branch office. If I use the site-to-site VPN wizard in ASDM on the existing 5505, should it overwrite or delete the existing remote access VPN configuration?
Naturally, I will save the existing config before I do this, but it'd be good for me to know what to expect, since we'll be on some tight deadlines with this project.
You can use the wizard which won't remove your old config. But if you have configured remote-access-VPNs before, you can probably do the same for site-2-site without the wizard. Thats straight forward: