cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
186
Views
0
Helpful
0
Replies
Beginner

Asa 5506 open poorts for rdp and sip

Hey all

 

Sort: Asa with 3 outside lines and 5 vlan on the inside

What i want to do:

Vlan20 - 10.10.20 40 Cisco 303 need yo go in/out on Vlan999

Vlan30 - 10.10.30.30 sip phome need yo go in/out on Vlan998

Vlan45 - 10.10.45.40 Rdp need to go in/out on Vlan 998

 

II use PBR for my outside and all is working but some how with the normal things like nat and acl i do not get it to work.

Prividers are not blocking ports and 998 and 999 are in bridge mode with dhcp from ip provider

 

What i did basic is this

 

object network obj-x.x.x.x     X.X.X.X = Internal IP of server 
 host X.X.X.X

 

object network INSIDE
 host X.X.X.X

object network obj-X.X.X.X
 nat (inside,outside) static Y.Y.Y.Y service tcp #####          Y.Y.Y.Y = IP on the outside

 

If any know what i do wrong plz let me know

with config as texst file