ASA-5506-X Firepower SFR loop

[Richard Klinkbeil]

I recently got an ASA 5506-X and uninstalled and installed FP 6.2.3 fresh. I also installed ASA software 9.9.2 & ASDM 7.9.2. I also updated the Rommon to 1.1.18. 

from the doc's I read, this should all be compatible, but the SFR now goes to Init->UP->unresponsive->init->up....etc

Did I miss something on the compatibility that needs to be fixed? or is there a better ASA/ASDM pair that works better? ROMMON too new?

Current config:

ASA: 9.9.2

Rommon: 1.1.18

ASDM: 7.9.2

SFR: 6.2.3-83

[Richard Klinkbeil]

Update: Upgraded to "asdm-7151-150" and it pulls all the menu's fine for firepower. And I supposed the module may reboot a couple times before it stays up? has not gone down since I posted the question.

[Marvin Rhoads]

IT should be compatible. I would recommend moving to the latest patch (6.2.3.16) for your Firepower service module. Quite a few bug fixes from the base 6.2.3 Build 83.

[Richard Klinkbeil]

Thanks, I did update to the latest. I found that the compatibly matrix for ASA/ASDM didn't work well with FirePower. I ended up going to the latest ASDM, and staying on ASA 9.9.2 and it all works fine now.