06-04-2019 09:36 AM
As a warning, after upgrade from 6.2.x to 6.3.0.3 of the FTD image, the ROMMON is upgraded to 1.1.8 and it will fail. This will require a replacement hardware from Cisco under the SLA.
Rom image verified correctly
Cisco Systems ROMMON, Version 1.1.8, RELEASE SOFTWARE
Copyright (c) 1994-2015 by Cisco Systems, Inc.
Compiled Thu 06/18/2015 12:15:56.43 by builders
%ERROR - Read failure - Device @ 0x50, offset 0x00 on I2C bus 0x00
%ERROR - Read failure - Device @ 0x50, offset 0x00 on I2C bus 0x00
%ERROR - Read failure - Device @ 0x50, offset 0x00 on I2C bus 0x00
Current image running: Boot ROM0
Last reset cause: LocalSoft
%ERROR - Read failure - Device @ 0x50, offset 0x00 on I2C bus 0x00DIMM Slot 0 : Present
DIMM Slot 1 : Present
Platform UNKNOWN with 8192 Mbytes of main memory
%ERROR - Read failure - Device @ 0x50, offset 0x00 on I2C bus 0x00Error: platform_required_check_var: Illegal MAC address.
MAC address is not set (ff:ff:ff:ff:ff:ff).
Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.
Located '.boot_string' @ cluster 360637.
#
Attempt autoboot: "boot disk0:"
Located 'os.img' @ cluster 323775.
#####################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################
LFBFF signature verified.
%ERROR - Read failure - Device @ 0x50, offset 0x00 on I2C bus 0x00No kernel found to launch.
Located '.boot_string' @ cluster 360637.
Located 'install.log' @ cluster 267231.
#
Located 'backup-config.cfg' @ cluster 360368.
Located 'startup-config' @ cluster 360371.
#
Located 'modified-config.cfg' @ cluster 360374.
boot: cannot determine first file name on device "disk0:/"
autoboot: All boot attempts have failed.
autoboot: Restarting the system.
Solved! Go to Solution.
06-04-2019 01:49 PM
%ERROR - Read failure - Device @ 0x50, offset 0x00 on I2C bus 0x00DIMM Slot 0 : Present
Seems like something went wrong here..raise an TAC for RMA.
06-04-2019 01:49 PM
%ERROR - Read failure - Device @ 0x50, offset 0x00 on I2C bus 0x00DIMM Slot 0 : Present
Seems like something went wrong here..raise an TAC for RMA.
06-04-2019 10:07 PM
Did you try upgrading the rommon separately to the current release (1.1.15)?
https://software.cisco.com/download/home/286285773/type/286287669/release/1.1.15
06-05-2019 11:32 AM
I called TAC and they shipped a new router. It's not possible to upgrade AFAIK when it is in that state.
06-05-2019 11:51 AM
Glad you getting new RMA, time for fresh install and move the config in to kit.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide