cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
265
Views
0
Helpful
1
Replies

ASA 5510 and gig

Phil Bradley
Level 4
Level 4

I have an older ASA 5510 with the security plus license and version 8.0(3). I just upgraded my ISP bandwidth to 150 Mbps but with auto negotiation it sets the port to 100 Mbps on eth 0/0 but the bandwidth shows 1000 Mbps. The drop-down on the ASDM only shows 10/100 or Auto as the speed settings. However on my inside interface, eth 0/1, the auto negotiated speed is 1000 Mbps and bandwidth is 1000 as well. Will eth 0/0 not work at 1000 Mbps?

1 Reply 1

Phil Bradley
Level 4
Level 4

Just found the answer through CLI. You can enable speed to 1000 Mbps through CLI. The asdm just doesn't have this setting. For whatever reason the auto negotiate was only getting set to 100 Mbps.

Review Cisco Networking for a $25 gift card