ASA 5510 Internal SSL traffic being blocked

[dlightsey912]

I work for a small business and we recently installed the ASA 5510, we have it configured and working properly except for one issue. Computers on the Inside interface can't connect to internal server websites via SSL. However external traffic is able to connect to the websites with no problem. Any suggestions on what we may have missed that might cause this behavior?

Thanks,

David

[Nagaraja Thanthry]

Hello,

Are you using the public IP of the server to connect to those pages? Have

you configured Hairpin NAT on the device?

http://www.cisco.com/en/US/products/ps6120/products_configuration_example091

86a00807968c8.shtml

Hope this helps.

Regards,

NT

[dlightsey912]

Our internal client can't access web server site using https, only using http. We setup using http as a workaround until we can get connection using https back up. Both the client and the web server are on the same subnet 192.168.1.0/24. We have NAT setup on the ASA to send external requests for 192.168.2.202 to 192.168.1.202, external clients can access the web server using https. I hope the basic diagram gives a little more information about what we are facing.

Thanks,

David