09-12-2012 11:53 PM - edited 03-11-2019 04:53 PM
Hi All,
we have ASA 5510 which we need to upgrade from 8.0(3) to 8.2.5.
can we directly switch to 8.2.5 from 8.0(3) , if not what all versions we need to go from.
What all point needs to check before that
It will gr8 if some one guide around steps & risk , learning’s from experience
following is show flash output.
97 14635008 Jan 01 2003 14:12:16 asa803-k8.bin
98 4096 May 14 2008 21:22:10 tmp
2 4096 Apr 20 2008 02:21:46 log
6 4096 Apr 20 2008 02:22:16 crypto_archive
99 6851212 Apr 20 2008 02:35:06 asdm-603.bin
101 4181246 Apr 20 2008 02:37:02 securedesktop_asa_3_2_1_103.pkg.zip
102 4096 Apr 20 2008 02:37:04 sdesktop
109 1462 Apr 20 2008 02:37:04 sdesktop/data.xml
103 3188033 Apr 20 2008 02:37:04 anyconnect-macosx-powerpc-2.1.0148-k9.pkg
104 3148346 Apr 20 2008 02:37:06 anyconnect-macosx-i386-2.1.0148-k9.pkg
105 1955915 Apr 20 2008 02:37:08 anyconnect-win-2.1.0148-k9.pkg
106 3488201 Apr 20 2008 02:37:10 anyconnect-linux-2.1.0148-k9.pkg
255582208 bytes total (216805376 bytes free)
Thanks
Yogesh
09-13-2012 12:24 AM
Thats a supported upgrade-path as there was no version 8.1 for the 5510.
1) (skip this step if you are really brave) read the release-notes to find changes that could have a negative impact on your network
2) Load a new ASDM into flash and make it active.
3) Load the new image into flash, set the image as boot-image (it's done automatically if you use the Update function from ASDM)
4) Reload your ASA.
These updates ran smooth in the past for my upgrades.
--
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni
09-13-2012 12:31 AM
Thanks Karsten for your reply & setps.
I also would like to know what is compatable ASDM version for same. as of now we have asdm-603.bin
09-13-2012 12:35 AM
You can check the compatibility from this doc:
http://www.cisco.com/en/US/docs/security/asa/compatibility/asamatrx.html
Hope this helps.
Thanks,
Varun Rao
Security Team,
Cisco TAC
03-12-2014 01:11 AM
Hello,
I also have remote access, S2S, SSL VPN, NAT configured on my ASA which is running 8.0.(3), will all the settings be migrated to 8.2.(5).
After successful upgrade to 8.2.(5), i am planning to upgrade the ASA to 8.4. Kindly help if the updrade path is correct and will migrate all the required configurations?
Thanks in advance.
Regards,
Anand
09-13-2012 12:36 AM
You can use the actual ASDM 6.4.9.103 which will run with both of your versions ASA 8.0 and 8.2.
--
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide