Hello All. I am not a ASA expert but I have configured them few times. I have a vision of a task I have to complete but not sure if it is practical or how to go about doing it.
We two locations, Location A and Location B. Both locations have a 100MB internet conection.
Location A has a ASA 5510. Location B has a 5505.
Users at both locations access the internet via their respective ASA.
Location A is the headquarters and Location B is a disaster recovery site.
We want to setup a tunnel between both ASAs. This tunnel will be used to replicate data between the two locations for DR purposes. We need the users to still use the same pipe to get to the internet but want to allocate 10MB for internet use and the remaining 90MB for the DR tunnel.
Can this be done? Any help would be appriciated. Thanks.
For all versions of the Email Security Appliance (ESA) and Security Management Appliance (SMA), some Secure Sockets Link (SSL) certificates issued from the QuoVadis root certificate authority (CA) trust chain before 2021-03-31 cannot b...
Automation and programmability for networking and security are increasingly important topics. Every release since ISE 1.2 has included new REST API capabilities to better automate and integrate ISE with the rest of your network, appli...
The latest iteration (v2.3.4) of the Cisco Secure Firewall Migration Tool adds public beta support for S2S VPN migrations from ASA:
Policy-based (crypto map) Pre-Shared key authentication type VPN configuration to Firepower Management Center
Cisco Defense Orchestrator (CDO) is a cloud-based, multi-device manager that manages security products like Adaptive Security Appliance (ASA), Firepower Threat Defense next-generation firewall, and Meraki devices, to name a few.
We make improvement...
This document presents the ISE data limiting best practices that can dramatically improve the system performance on ISE.
Your deployment may be impacted if the alarms tab on ISE shows High load average, high CPU or high memoy usage alarm...