cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2143
Views
0
Helpful
3
Replies

ASA 5515-X FirePower 6.4.0 image boot issue

Khaled Douma
Level 1
Level 1

I couldn't boot sfr image for v6.4.0 while re-imaging firepower service as shown below and in the attached debug file

 

ASA 5515: fresh reimaging firepower 6.4.0

Cisco Adaptive Security Appliance Software Version 9.12(4)10

---- --------------------------------- ------------ ------------ ---------------

show module all

sfr    0006.f62b.3592   to   0006.f62b.3592    N/A    N/A

sfr    Recover     Not Applicable   Not powered on completely

------------------------------------

show inventory:
Name: "Chassis", DESCR: "ASA 5515-X with SW, 6 GE Data, 1 GE Mgmt, AC"
PID: ASA5515 , VID: V01 , SN: FGL170

Name: "Storage Device 1", DESCR: "Model Number: Micron_M550_MTFAK28MAY"
PID: N/A , VID: N/A , SN: MSA100TM

------------------------------------

boot Image:

show flash: | include asasfr-5500x-bo

169 42956800 Feb 16 2021 14:09:42 asasfr-5500x-boot-6.4.0-1.img

 

------------------------------------

debug module-boot

Mod-sfr 593> *** EVENT: The module is being automatically restarted.
Mod-sfr 594> *** TIME: 15:03:46 EET Feb 16 2021
Mod-sfr 595> ***
Mod-sfr 596> ***
Mod-sfr 597> *** EVENT: Start Parameters: Image: /mnt/disk0/vm/vm_3.img, ISO: , Num CPUs: 2, RA
Mod-sfr 598> M: 3466MB, Mgmt MAC: 00:06:F6:2B:35:92, CP MAC: 00:00:00:04:00:01, HDD: -drive fil
Mod-sfr 599> e=/dev/sda,cache=none,if=virtio, Dev Driver: virtio
Mod-sfr 600> *** TIME: 15:03:46 EET Feb 16 202
Mod-sfr 601> ***
Mod-sfr 602> *** EVENT: Start Parameters Continued: RegEx Shared Mem: 0MB, Cmd Op: , Shared Mem
Mod-sfr 603> Key: 8061, Shared Mem Size: 16, Log Pipe: /dev/ttyS0_vm3, Sock: /dev/ttyS1_vm3, M
Mod-sfr 604> em-Path: -mem-path /hugepages
Mod-sfr 605> *** TIME: 15:03:46 EET Feb 16 2021
Mod-sfr 606> ***
Mod-sfr 607> (process:7840): GLib-WARNING **: /local/jenkins/workspace/fxplatform/Builds/releas
Mod-sfr 608> e__2.6.1_fcs_hammersmith/build-smp-compile/fxos/linux/wrlinux/bitbake_build/tmp/wo
Mod-sfr 609> rk/corei7-64-wrs-linux/glib-2.0/1_2.54.3-r0/glib-2.54.3/glib/gmem.c:483: custom me
Mod-sfr 610> mory allocation vtable not supported
Mod-sfr 611> WARNING: Image format was not specified for '/mnt/disk0/vm/vm_3.img' and probing g
Mod-sfr 612> uessed raw.
Mod-sfr 613> Automatically detecting the format is dangerous for raw images, write ope
Mod-sfr 614> rations on block 0 will be restricted.
Mod-sfr 615> Specify the 'raw' format explicitly to remove the restrictions.
Mod-sfr 616> qemu-system-x86_64: -drive file=/dev/sda,cache=none,if=virtio: Could not read imag
Mod-sfr 617> e for determining its format: Input/output error
Mod-sfr 618> ***
Mod-sfr 619> *** EVENT: The module is being automatically restarted.
Mod-sfr 620> *** TIME: 15:03:46 EET Feb 16 2021
Mod-sfr 621> ***
Mod-sfr 622> ***
Mod-sfr 623> *** EVENT: Start Parameters: Image: /mnt/disk0/vm/vm_3.img, ISO: , Num CPUs: 2, RA
Mod-sfr 624> M: 3466MB, Mgmt MAC: 00:06:F6:2B:35:92, CP MAC: 00:00:00:04:00:01, HDD: -drive fil
Mod-sfr 625> e=/dev/sda,cache=none,if=virtio, Dev Driver: virtio
Mod-sfr 626> *** TIME: 15:03:46 EET Feb 16 202
Mod-sfr 627> ***
Mod-sfr 628> *** EVENT: Start Parameters Continued: RegEx Shared Mem: 0MB, Cmd Op: , Shared Mem
Mod-sfr 629> Key: 8061, Shared Mem Size: 16, Log Pipe: /dev/ttyS0_vm3, Sock: /dev/ttyS1_vm3, M
Mod-sfr 630> em-Path: -mem-path /hugepages
Mod-sfr 631> *** TIME: 15:03:46 EET Feb 16 2021
Mod-sfr 632> ***
Mod-sfr 633> (process:7847): GLib-WARNING **: /local/jenkins/workspace/fxplatform/Builds/releas
Mod-sfr 634> e__2.6.1_fcs_hammersmith/build-smp-compile/fxos/linux/wrlinux/bitbake_build/tmp/wo
Mod-sfr 635> rk/corei7-64-wrs-linux/glib-2.0/1_2.54.3-r0/glib-2.54.3/glib/gmem.c:483: custom me
Mod-sfr 636> mory allocation vtable not supported
Mod-sfr 637> WARNING: Image format was not specified for '/mnt/disk0/vm/vm_3.img' and probing g
Mod-sfr 638> uessed raw.
Mod-sfr 639> Automatically detecting the format is dangerous for raw images, write ope
Mod-sfr 640> rations on block 0 will be restricted.
Mod-sfr 641> Specify the 'raw' format explicitly to remove the restrictions.
Mod-sfr 642> qemu-system-x86_64: -drive file=/dev/sda,cache=none,if=virtio: Could not read imag
Mod-sfr 643> e for determining its format: Input/output error
Mod-sfr 644> ***
Mod-sfr 645> *** EVENT: The module is being automatically restarted.
Mod-sfr 646> *** TIME: 15:03:47 EET Feb 16 2021
Mod-sfr 647> ***
Mod-sfr 648> ***
Mod-sfr 649> *** EVENT: Start Parameters: Image: /mnt/disk0/vm/vm_3.img, ISO: , Num CPUs: 2, RA
Mod-sfr 650> M: 3466MB, Mgmt MAC: 00:06:F6:2B:35:92, CP MAC: 00:00:00:04:00:01, HDD: -drive fil
Mod-sfr 651> e=/dev/sda,cache=none,if=virtio, Dev Driver: virtio
Mod-sfr 652> *** TIME: 15:03:47 EET Feb 16 202
Mod-sfr 653> ***
Mod-sfr 654> *** EVENT: Start Parameters Continued: RegEx Shared Mem: 0MB, Cmd Op: , Shared Mem
Mod-sfr 655> Key: 8061, Shared Mem Size: 16, Log Pipe: /dev/ttyS0_vm3, Sock: /dev/ttyS1_vm3, M
Mod-sfr 656> em-Path: -mem-path /hugepages
Mod-sfr 657> *** TIME: 15:03:47 EET Feb 16 2021
Mod-sfr 658> ***
Mod-sfr 659> (process:7854): GLib-WARNING **: /local/jenkins/workspace/fxplatform/Builds/releas
Mod-sfr 660> e__2.6.1_fcs_hammersmith/build-smp-compile/fxos/linux/wrlinux/bitbake_build/tmp/wo
Mod-sfr 661> rk/corei7-64-wrs-linux/glib-2.0/1_2.54.3-r0/glib-2.54.3/glib/gmem.c:483: custom me
Mod-sfr 662> mory allocation vtable not supported
Mod-sfr 663> WARNING: Image format was not specified for '/mnt/disk0/vm/vm_3.img' and probing g
Mod-sfr 664> uessed raw.
Mod-sfr 665> Automatically detecting the format is dangerous for raw images, write ope
Mod-sfr 666> rations on block 0 will be restricted.
Mod-sfr 667> Specify the 'raw' format explicitly to remove the restrictions.
Mod-sfr 668> ***
Mod-sfr 669> *** EVENT: The module has exited unexpectedly more than 3 times in 5 seconds. The
Mod-sfr 670> module will attempt to restart in 60 seconds.
Mod-sfr 671> *** TIME: 15:03:47 EET Feb 16 2021
Mod-sfr 672> ***
Mod-sfr 673> qemu-system-x86_64: -drive file=/dev/sda,cache=none,if=virtio: Could not read imag
Mod-sfr 674> e for determining its format: Input/output error

 

------------------------------------

I have followed below guide:

https://www.cisco.com/c/en/us/support/docs/security/asa-firepower-services/118644-configure-firepower-00.html

1 Accepted Solution

Accepted Solutions

Chakshu Piplani
Cisco Employee
Cisco Employee

Hi,

 

From the debugs the issue seems to be related to the SSD.

 

Can you completely shutdown ASA and re-seat the SSD and try running the SFR installation again.

 

HTH

 

Do rate helpful posts.

Chakshu

View solution in original post

3 Replies 3

Chakshu Piplani
Cisco Employee
Cisco Employee

Hi,

 

From the debugs the issue seems to be related to the SSD.

 

Can you completely shutdown ASA and re-seat the SSD and try running the SFR installation again.

 

HTH

 

Do rate helpful posts.

Chakshu

wwu
Level 1
Level 1

I am having similar warning.

Mod-sfr 472>WARNING: Image format was not specified for '/mnt/disk0/vm/vm_3.img' and probing guessed raw.

Mod-sfr 477> WARNING: Image format was not specified for '/dev/md0' and probing guessed raw.

Any update?

It was an SSD Issue,

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card