06-05-2016 11:09 PM - edited 03-12-2019 12:50 AM
Hi Experts,
How can i create port forwarding (redirecting) with Dynamic PAT via ASDM ?
The outside inerface, has IP Valid on it, so i can't set port forwarding with Dynamic PAT...
I would be thankfull, if anyone help me!
06-05-2016 11:14 PM
Hi,
Please refer this guide showing various NAT configurations using ASDM
http://www.cisco.com/c/en/us/td/docs/security/asa/asa90/asdm70/configuration_guide/asdm_70_config/nat_objects.html#97834
HTH,
Abaji.
06-06-2016 12:33 AM
thank you for your help, but this web site, doesn't have any info. for my scenario.
I just have a static IP Address on my outside interface, so i should do two things :
1- internal Servers should have internet access
2- outside users should access internal servers with different ports
i did first parameter with dynamic PAT, but i have problem with second parameter.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide