05-24-2020 11:28 PM
Hi all,
We have a server which requires to go out on a specific interface "outside3". I tried to set it up so it will route to outside3 but somehome the traffic still go out at outside2.
This is what I configure for that change:
access-list outside3_access_in extended permit object-group DM_INLINE_PROTOCOL_1 host xxx.xyz.000.abc host 192.168.12.233
access-list Route_to_ASP extended permit object-group DM_INLINE_PROTOCOL_2 host 192.168.12.233 host xxx.xyz.000.abc
object network Subnet_12_ASP
nat (inside1,outside3) dynamic interface
access-group outside3_access_in in interface outside3
route-map Route_to_ASP_PBR permit 20
match ip address Route_to_ASP
set ip next-hop 10.15.0.2
route outside3 0.0.0.0 0.0.0.0 10.15.0.2 120
http 10.15.0.0 255.255.255.248 outside3
Hope you could help me out. Thank you.
Chuong
05-25-2020 12:49 AM
05-26-2020 03:07 PM
I have 2 others outside interfaces but I don't see any policy map apply to those interface in the config file. There is only one policy-map command which is policy-map global_policy.
How do I do that? Sorry, I'm really novice with ASA. Thanks.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: