ASA 5520 - Trustpoint enrollment configuration cannot be changed for an authenticated trustpoint?
Help Please :)
We have an ASA 5520 that we have installed a new certificate. The company was purchased and we are removing all references to old company domain name. We deleted the Trustpoint and have attempted to set new trustpoint for enrollment???
See commands below:
no crypto ca trustpoint ASDM_TrustPoint7
crypto ca trustpoint NEW-WC1 enrollment terminal
when we run above command, we get this error:
ERROR: Trustpoint enrollment configuration cannot be changed for an authenticated trustpoint.
The purpose of this document is to demonstrate how ISE authenticate / authorize a user that uses a smart card (PIN + Certificate) and password mechanism to login their system. This document describes the components used for this setup, configuration of IS...
For all versions of the Email Security Appliance (ESA) and Security Management Appliance (SMA), some Secure Sockets Link (SSL) certificates issued from the QuoVadis root certificate authority (CA) trust chain before 2021-03-31 cannot b...
Automation and programmability for networking and security are increasingly important topics. Every release since ISE 1.2 has included new REST API capabilities to better automate and integrate ISE with the rest of your network, appli...
The latest iteration (v2.3.4) of the Cisco Secure Firewall Migration Tool adds public beta support for S2S VPN migrations from ASA:
Policy-based (crypto map) Pre-Shared key authentication type VPN configuration to Firepower Management Center
Cisco Defense Orchestrator (CDO) is a cloud-based, multi-device manager that manages security products like Adaptive Security Appliance (ASA), Firepower Threat Defense next-generation firewall, and Meraki devices, to name a few.
We make improvement...