cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

126
Views
0
Helpful
4
Replies
Highlighted
Beginner

asa 5540 vpn ip addressing quesiton

i'd like to change the outside address that my 5540 listens on for our ipsec vpn clients, where exactly do i change this?  perhaps in nat rules (tcp 1000?) we have a /29 and i'd like to replace our pix that is serving as our vpn and would love to reuse that address so there is no config changes.

  

4 REPLIES 4
Highlighted

Maybe you can ask Cisco CCIE for help. If you don't know much about Cisco ASA 5540 firewall, maybe this can help you.

Highlighted

ok thanks, i'm somewhat familiar with the pix / asa firewalls as i have set ours up and manage it, but i thought this was the best place to put this!  

 

 

 

 

Highlighted
Rising star

Hi mgraham99,

 

You change the nat rule that associated with particular public address on which that service request come on for protocol 'esp' and 'ah'.

 

Hope that helps.

 

Thanks

Rizwan Rafeek

 

Highlighted

Rizwan, i actually figured it out today.  

 

this is how i fixed it. 

 

re created all VPN rules, new tunnel address range, and shut down the old pix.  right after that i changed the outside global address of the 5540 to the pix global and everything transitioned smoothly! 

Content for Community-Ad