cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
452
Views
3
Helpful
2
Replies

ASA 5550 (8.2)

bhupendrajain
Level 1
Level 1

I'm facing one problem with Cisco ASA 5550 (8.2)firewall,

Currently we've one OUTSIDE, DMZ, & INSIDE interface,  default route towards OUTSIDE for all outgoing traffic.

Now, we've taken a new public connectivity for our seprate SMTP services, which i need to route via this new connectivity. Requirement is that only SMTP traffic ( Few Servers of Inside natted with Public IPs) should go via new connectivity & all other traffic should go via OUTSIDE interface.

.

2 Replies 2

julomban
Level 3
Level 3

Bhupendra,

This is policy based routing which is not supported by the ASA appliance. The ASA only routes traffic based on destination IP and not by source or service (SMTP).

This type of routing is supported on Routers but not on the ASA.

Regards,

Juan Lombana

Please rate helpful posts.

hi julomban

it is right that this is policy based routing, but for that we have add static route for vpn traffice and rest will be shifted to new link but some other host site which is on old link and global ip for that we put default route with high matrix.

Thanks

Bhupendra

Review Cisco Networking for a $25 gift card