ASA 5585-X SFR SSP-40

[knuckleheadbob]

i have a couple of these that appear to be completely wiped, booting to rommon i have tried images from 844-1 to 9-12-4-67 every image i tftp boot from rommon comes back with This is an ASA image and cannot be loaded on a PIX platform if anyone could shed some light on where i am going wrong or recommend a different procedure or image i would sure appreciate the insight.  using the smp images for example asa9-12-4-67-smp-k8.bin

[knuckleheadbob · Accepted solution]

looks like i answered my own question, need to do the rommon load from core in slot 0 not from the addon in slot 1

[ahollifield]

https://www.cisco.com/c/en/us/products/collateral/security/asa-5500-series-next-generation-firewalls/eos-eol-notice-c51-740021.html

[knuckleheadbob]

glad you can copy and eol notice

[ahollifield]

You’re welcome. I hope this firewall is not exposed to the public internet.

[knuckleheadbob]

since you are just trolling and adding useless comments, get off the soapbox and go away 

[ahollifield]

Sharing an EoL notice which you may or may not be aware of is useless?