cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
572
Views
25
Helpful
3
Replies

ASA 5585-X ssp 20 error with CSM 4.3

mazhar mahadik
Level 1
Level 1

Hi guyz,

 

I have cisco security manager CSM 4.3 , was trying to add ASA5585-SSP-20 to CSM , but getting below error.

Message : Invalid device type or version
Severity : Error
Description : Invalid device: The device combination of version "9.1(2) (8.6)" and OS mode
"ROUTER" and OS multiplicity "SINGLE" is not supported for the device type of Cisco ASA-5585
Adaptive Security Appliance. Please check if the image version is supported for this device type.

Action : Please verify the selected device type, OS version and device configuration.

 

However i have ASA5515-X already added to it & working fine.

 

Any clue on this

 

Thanks,

1 Accepted Solution

Accepted Solutions

It sounds surprisingly about ASA5515 and SCM 4.3

coz of following URLs:

http://www.cisco.com/c/en/us/td/docs/security/security_management/cisco_security_manager/security_manager/4-4/release/notes/csmrn44.html#wp70531

Cisco Security Manager 4.4

In addition to resolved caveats, this release includes the following new features and enhancements:

•The following devices are now supported in Security Manager 4.4:

–ASA 9.0(1).

–ASA 9.1 and its compatible ASDM.

–ASA 8.4(5).

–Cisco Catalyst 7600 Series ASA Services Modules (ASA-SM).

–ASR backward compatibility support.

http://www.cisco.com/c/en/us/td/docs/security/security_management/cisco_security_manager/security_manager/4-5/release/notes/csmrn45.html#wp362107

Support for additional devices (for detailed compatibility information, refer to Supported Devices and Software Versions for Cisco Security Manager 4.5 ):

–IPS 7.1(8) and 7.2(1)

–ASA 8.4(6)

–ASA 9.1(2) and 9.1(3) (both standalone ASA and ASA-SM)

–ISR 4451 with IOS-XE 3.9 image

 

View solution in original post

3 Replies 3

mazhar mahadik
Level 1
Level 1

 

Also ASA5515-X which is already added has same software version of 9.1(2).

ASA5585-SSP-20 which is giving error also has same ver 9.1(2)

It sounds surprisingly about ASA5515 and SCM 4.3

coz of following URLs:

http://www.cisco.com/c/en/us/td/docs/security/security_management/cisco_security_manager/security_manager/4-4/release/notes/csmrn44.html#wp70531

Cisco Security Manager 4.4

In addition to resolved caveats, this release includes the following new features and enhancements:

•The following devices are now supported in Security Manager 4.4:

–ASA 9.0(1).

–ASA 9.1 and its compatible ASDM.

–ASA 8.4(5).

–Cisco Catalyst 7600 Series ASA Services Modules (ASA-SM).

–ASR backward compatibility support.

http://www.cisco.com/c/en/us/td/docs/security/security_management/cisco_security_manager/security_manager/4-5/release/notes/csmrn45.html#wp362107

Support for additional devices (for detailed compatibility information, refer to Supported Devices and Software Versions for Cisco Security Manager 4.5 ):

–IPS 7.1(8) and 7.2(1)

–ASA 8.4(6)

–ASA 9.1(2) and 9.1(3) (both standalone ASA and ASA-SM)

–ISR 4451 with IOS-XE 3.9 image

 

Hi 

 

Yes it was version mismatch issue.

CSM 4.3 dint support ASA 5585-X with 9.1(2) , after upgrading to CMS4.5 , ASA were detected fine.

 

Thanks.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: