05-02-2012 01:26 PM - edited 03-11-2019 04:01 PM
Hello,
I've got a few syslog servers I need to send specific informational that consists of the following:
Source/Destination/Service (Firewall Logs)
I'm having some difficulty located the proper syslog messages found in this link: http://www.cisco.com/en/US/docs/security/asa/asa84/system/message/logmsgs.html
Which syslog messages should I configure to enable this requirement?
Any help would be greatly appreciated.
Regards,
Phillip
Solved! Go to Solution.
05-02-2012 01:32 PM
You would need to enable the logs at informational level or higher for it, you can refer to this doc for it:
https://supportforums.cisco.com/docs/DOC-18813
Also these logs shoudl be the one that you should be interested in 302013 and 302014:
http://www.cisco.com/en/US/docs/security/asa/asa84/system/message/logmsgs.html#wp6482625
Hope that helps,
Thanks,
Varun
05-02-2012 01:32 PM
You would need to enable the logs at informational level or higher for it, you can refer to this doc for it:
https://supportforums.cisco.com/docs/DOC-18813
Also these logs shoudl be the one that you should be interested in 302013 and 302014:
http://www.cisco.com/en/US/docs/security/asa/asa84/system/message/logmsgs.html#wp6482625
Hope that helps,
Thanks,
Varun
05-02-2012 02:01 PM
Thanks for the quick answer Varun! Much appreciated.
Regards,
Phillip
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide