I have one confusion please confirm.
I got two firewalls 5540 both of them have SSL VPN Premium license, one of them have software version of 8.0(2) with SDM version of 6.1(5)
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited
Maximum VLANs : 200
Inside Hosts : Unlimited
Failover : Active/Active
VPN-DES : Enabled
VPN-3DES-AES : Enabled
Security Contexts : 2
GTP/GPRS : Disabled
VPN Peers : 5000
WebVPN Peers : 2
Advanced Endpoint Assessment : Disabled
This platform has an ASA 5540 VPN Premium license.
and other have 8.2(2) with SDM version of 6.3(1).
Maximum Physical Interfaces : Unlimited
Maximum VLANs : 200
Inside Hosts : Unlimited
Failover : Active/Active
VPN-DES : Enabled
VPN-3DES-AES : Enabled
Security Contexts : 2
GTP/GPRS : Disabled
SSL VPN Peers : 2
Total VPN Peers : 5000
Shared License : Disabled
AnyConnect for Mobile : Disabled
AnyConnect for Cisco VPN Phone : Disabled
AnyConnect Essentials : Disabled
Advanced Endpoint Assessment : Disabled
UC Phone Proxy Sessions : 2
Total UC Proxy Sessions : 2
Botnet Traffic Filter : Disabled
This platform has an ASA 5540 VPN Premium license.
now since Cisco VPN client is End of Sale and i've to shift my existing user base to cisco anyconnect client (which will be installed first time when the users hits the IP address)
So now the question is should i need to upgrade or purchase any new anyconnect license type like essential or premium? or my existing setup is sufficient enough for any connect?
