06-13-2013 07:16 PM - edited 03-11-2019 06:57 PM
hi all,
i've checked in on one of our 5510's and also on a 5505 but i don't seem to find the license duration (i.e "perpetual).
is this normal or just an IOS or platform specific?
# sh activation-key detail
Serial Number: JMXzzzz
No active temporary key.
Running Activation Key: 0xzzzz 0xzzzz 0xzzzz 0xzzzz 0xzzzz
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited
Maximum VLANs : 100
Inside Hosts : Unlimited
Failover : Active/Active
VPN-DES : Enabled
VPN-3DES-AES : Enabled
Security Contexts : 2
GTP/GPRS : Disabled
SSL VPN Peers : 2
Total VPN Peers : 250
Shared License : Disabled
AnyConnect for Mobile : Disabled
AnyConnect for Cisco VPN Phone : Disabled
AnyConnect Essentials : Enabled
Advanced Endpoint Assessment : Disabled
UC Phone Proxy Sessions : 2
Total UC Proxy Sessions : 2
Botnet Traffic Filter : Disabled
This platform has an ASA 5510 Security Plus license.
The flash activation key is the SAME as the running key.
# sh ve
Cisco Adaptive Security Appliance Software Version 8.2(5)
Device Manager Version 6.2(3)
Solved! Go to Solution.
06-13-2013 08:16 PM
Hello John,
In this case u have the security plus license which is permanent ( only 5505 and 5510 have base and security plus license)
You can then enable some features temporaly ( Like botnet ) that would be a temporary license.
Regards,
Remember to rate all of the helpful posts.
For this community that's as important as a thanks.
06-13-2013 08:16 PM
Hello John,
In this case u have the security plus license which is permanent ( only 5505 and 5510 have base and security plus license)
You can then enable some features temporaly ( Like botnet ) that would be a temporary license.
Regards,
Remember to rate all of the helpful posts.
For this community that's as important as a thanks.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: