cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
757
Views
0
Helpful
2
Replies

ASA not passing LPD

jack_martin
Level 1
Level 1

I having trouble configuring my first ASA I need to pass lpd traffic and the implicit rule is blocking me I attached my config. I am not sure if the problem is the access list or my nat.

2 Replies 2

rkalia1
Level 1
Level 1

do the following :

access-list outside_access_in extended permit tcp any host 192.168.9.9 eq lpd

static (inside,outside) 192.168.9.9 10.1.24.9 netmask 255.255.255.255

Your static is the other way round.

Raman

Thank you for the information. I discovered the problem on Friday and was able to correct it. I question it does help to step away from a projectfor a while then come back with a fresh look at the code.

Review Cisco Networking for a $25 gift card