I am experiencing an issue with the software image on a Cisco Firepower 1010 device. After performing a factory reset, I accidentally erased disk0:, which resulted in the loss of the system image. As a result, the device can no longer boot and is cur...
Forum Posts
If you manage VPNs on Cisco Firepower (FTD) with FMC, you’ve probably seen this at least once:Phase 1 is up. Phase 2 is up. Users still can’t reach anything.That moment is why I always remind teams of one simple truth:An IPsec tunnel can be “UP” and ...
Greetings Everyone, im new with cisco Firewall Management Center. we had an issue with monitoring widget not displaying (buffering) on Summary Dashboard Network tab. We already searching to troubleshoot this issue, some of the tshoot that we applied...
Resolved! Cisco Firesight "No any Data"
Dear Expert, I'm quite new with Cisco FirePower. I have 2 Cisco ASA5555 with Firepower and deploy as Active/Standby. We have three zone INSIDE OUTSIDE and Management. Firesight server is stay in management zone. I registered all Cisco Firepower modu...
Here’s the situation. I have a Cisco FPR 1010 with FTD, managed via FMC, both running version 7.4.2. I need to set up AnyConnect with authentication via RADIUS. I managed to get AnyConnect up without issues, but there’s a problem with ISE: FTD cannot...
I was wondering if anyone else has experienced this - we have just deployed a Windows 2025 HyperV Cluster, and, after the deployment, all the cluster servers have started experiencing SSL errors (ERR_CERT_AUTHORITY_INVALID), and referencing the same ...
Hello Together,I configured on Cisco FMC 7.6 the DHCP Server for one Sub-Interface because we have to route this VLAN on the Firewall. I add the VLAN tag and configured the switch also for this Vlan. Problem is I cannot get a lease. I saw on Cisco IS...
Hi, Need to transfer or migrate ips configuration of Ftd 2130 running os version 7.0.4 to Ftd 3120 running os version 7.6.2. How can i achieve it
Hello Team, I am testing a Cisco Firepower 1010 physical appliance running FTD 7.2.5 in standalone mode. The device is currently in Evaluation mode (no licenses applied). Observed behavior: Internet traffic works when allowed in Access Control. In...
I am having a difficult time copying files to and from a local tftp server with an ASA. I want to plug my laptop running the tftp server directly into the ASA on one of it's ethernet ports and copy files but I can't seem to get the laptop and ASA to...
I think I'm encountering this bug here:https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwo48630There's a task stuck called Policy Changes Report Request - Policy preview diff generation is in progressI was going to start maintenance work on a FTDv HA...
I'm going to move my secondary FMC device to another physical location and i will change its ip address used in the HA configuration. so, i was planning to 1- break FMC HA 2- change FMC IP 3- configure HA again what i expect that FTD will be manage...
Greetings,We're planning to migrate our Cisco VPN ASA's to FTD Devices.Within the ASA's we currently utilize 3 Tunnel Groups (Connection Profiles). One External use (DMZ) and Two Internal.We've several ASA VPN Group Policies tied to our Active Direct...
Is the following even possible? I would like to configure Microsoft NPS to act as a Radius Server to authenticate and allow users who are present in one of two active directory OU's (OU #1 & OU I#2) to ssh into the device and then if the user is in O...
I upgraded by ASA 5525x with asa9.14.4 which is a special version for a security fix. That broke ASDM. So, after consulting my Cisco Field Engineer I upgraded ASDM to asdm-7.23.1. After updating the path and upgrading Java to the recommeded versi...
