ASA+RRI

[smitty6504]

We are running a ASA5520 and I have configured for a RRI on a L2L tunnel, but the tunnel is not connected and the route is still in the ASA routing table.

Is this the way the RRI should be working? I am trying to use 2 ASA's on two different ISP'S to terminate the L2L tunnels then have an IGP take care of the routing if one of the tunnels/ISP's fail.

[Collin Clark]

The RRI looks at the VPN configuration and installs the route per the configuration (the crypto ACLs).

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00809d07de.shtml

Hope that helps.