asa-sm control-plane & global rules

[ronald.spicka]

hi,

i am currently deploying a new asa-sm module (code 8.5.1) and i found a strange behaviour that i cannt explain.

if i create a global access-list and bind it to the global access-group, i see this acl in the management access rules (via asdm)

so it seems that the global access-list binds to the control-plane

if i do the same on an asa 5550 running code 8.4.x it works, the global acl doesn't show of in the control-plan management.

so i am not sure if it's a bug or configuration error, but i haven't found another way to configure this.

btw: i can add other acls to the control-plane:

[mirober2 · Accepted solution]

Hi Ronald,

This is caused by the following bug:

CSCtt37390 - ASDM displays global ACL in Management Access Rules

The bug is fixed in the latest ASDM 6.4(7) release so please give that a try. If you still have issues with 6.4(7), I would recommend opening a TAC case to investigate if there is still an issue that needs to be fixed.

-Mike

[ronald.spicka]

Hi Mike,

Thanks for your info, seems that the bug also hits asdm version 6.5.1 (asa module)

So i will wait for the next release

thanks

ronald