ASA State Table

[SivaVigneshKumar]

Dear All,

I have a doubt on working with timeouts and state table.

Below is the Same output

ASA# show conn protocol tcp
101 in use, 5589 most used
TCP outside 10.23.232.59:5223 inside 192.168.1.3:52419, idle 0:00:11, bytes 0, flags saA
TCP outside 192.168.3.5:80 dmz 172.16.103.221:57646, idle 0:00:29, bytes 2176, flags UIO
TCP outside 10.23.232.217:5223 inside 192.168.1.3:52425, idle 0:00:10, bytes 0, flags saA
TCP outside 10.23.232.217:443 inside 192.168.1.3:52427, idle 0:01:02, bytes 4504, flags UIO
TCP outside 10.23.232.57:5223 inside 192.168.1.3:52412, idle 0:00:23, bytes 0, flags saA
TCP outside 10.23.232.116:5223 inside 192.168.1.3:52408, idle 0:00:23, bytes 0, flags saA
TCP outside 10.23.232.60:5223 inside 192.168.1.3:52413, idle 0:00:23, bytes 0, flags saA
TCP outside 10.23.232.96:5223 inside 192.168.1.3:52421, idle 0:00:11, bytes 0, flags saA
TCP outside 10.23.232.190:5223 inside 192.168.1.3:52424, idle 0:00:10, bytes 0, flags saA

In the Mentioned output of the command show conn.

What does idle mean ? and how does it works.

[Seb Rupik]

Hi there,

Each line represents a seperate connection and the idle timer indicates the elpased time since a packet relevant to that connection has passed through the ASA.

cheers,

Seb.

[SivaVigneshKumar]

Thanks Seb,

Let us consider the UDP packet crossed the firewall and there is no reply from destination and my TCP timeout is 2 Mins and i have configured embryonic timeout to be 40 mins and idle time out as 1 hr so in this will the connection table will exists till 1 hour or will be cleared after 2 Mins.

Configuration.

class Default_class

  set connection embryonic-conn-max 3000

  set connection timeout embryonic 0:40:00 idle 1:00:00

[Seb Rupik]

UDP and TCP are handled differently. There is no state with UDP so no concept of being embryonic (half-open).

UDP connections are cleared by configuring the UDP idle timeout:

!
timeout udp <hh:mm:ss> 
!

https://www.cisco.com/c/en/us/td/docs/security/asa/asa96/configuration/firewall/asa-96-firewall-config/conns-connlimits.html#ID-2068-0000003c

cheers,

Seb.