08-26-2015 05:51 AM - edited 03-11-2019 11:29 PM
on active there are 17000 sessions
but on standby only 8000 sessions?
is this normal? i found some log and err on standby
ug 26 2015 15:12:51: %ASA-3-210005: LU allocate connection failed
Aug 26 2015 15:12:53: %ASA-3-210005: LU allocate connection failed
Aug 26 2015 15:12:53: %ASA-3-210005: LU allocate connection failed
Aug 26 2015 15:12:53: %ASA-3-210005: LU allocate connection failed
Aug 26 2015 15:12:54: %ASA-3-210005: LU allocate connection failed
Aug 26 2015 15:12:55: %ASA-3-210005: LU allocate connection failed
ASA5550-A# show failover
Failover On
Failover unit Primary
Failover LAN Interface: g0/2 GigabitEthernet0/2 (up)
Unit Poll frequency 1 seconds, holdtime 15 seconds
Interface Poll frequency 3 seconds, holdtime 15 seconds
Interface Policy 1
Monitored Interfaces 4 of 256 maximum
Version: Ours 8.2(5), Mate 8.2(5)
Last Failover at: 18:38:11 CN Aug 25 2015
This host: Primary - Standby Ready
Active time: 29269 (sec)
slot 0: ASA5550 hw/sw rev (2.0/8.2(5)) status (Up Sys)
Interface outside (10.6.55.250): Normal
Interface outside-pi-1 (10.6.4.244): Normal
Interface outside-cn2 (10.6.3.38): Normal (Not-Monitored)
Interface inside (10.6.56.249): Normal
Interface management (0.0.0.0): Link Down (Not-Monitored)
Interface inside2 (10.6.59.253): Normal
slot 1: ASA-SSM-4GE-INC hw/sw rev (1.0/1.0(0)10) status (Up)
Other host: Secondary - Active
Active time: 74354 (sec)
slot 0: ASA5550 hw/sw rev (2.0/8.2(5)) status (Up Sys)
Interface outside (10.6.55.251): Normal
Interface outside-pi-1 (10.6.4.245): Normal
Interface outside-cn2 (10.6.3.37): Normal (Not-Monitored)
Interface inside (10.6.56.254): Normal
Interface management (192.168.1.1): Normal (Not-Monitored)
Interface inside2 (10.6.59.254): Normal
slot 1: ASA-SSM-4GE-INC hw/sw rev (1.0/1.0(0)10) status (Up)
Stateful Failover Logical Update Statistics
Link : g0/3 GigabitEthernet0/3 (up)
Stateful Obj xmit xerr rcv rerr
General 15803341 0 25818616 28332
sys cmd 13813 0 13813 1
up time 0 0 0 0
RPC services 0 0 0 0
TCP conn 12499770 0 18737420 8810
UDP conn 3282047 0 7051875 19521
ARP tbl 7711 0 15508 0
Xlate_Timeout 0 0 0 0
IPv6 ND tbl 0 0 0 0
VPN IKE upd 0 0 0 0
VPN IPSEC upd 0 0 0 0
VPN CTCP upd 0 0 0 0
VPN SDI upd 0 0 0 0
VPN DHCP upd 0 0 0 0
SIP Session 0 0 0 0
Logical Update Queue Information
Cur Max Total
Recv Q: 0 17 25996573
Xmit Q: 0 1469 15834078
08-26-2015 05:52 AM
do we have method to mannual re-synchronized connection table from active to standby
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide