ā01-25-2018 03:30 PM - edited ā02-21-2020 07:12 AM
Hello team,
plz your support
about the below ... the asa without any firmware now .. how can I solve this and the memory i think its filled.
ā01-25-2018 03:57 PM
Delete old files off the flash you don't need (such as the old firmware).
dir flash:
delete flash:xxx
ā01-25-2018 04:00 PM
ā01-25-2018 04:02 PM
Find other files you can delete. Perhaps old anyconnect packages, etc.
ā01-26-2018 12:26 AM
Is that the legacy 5505? With the default flash, there is only space for one firmware, asdm and two anyconnect images. If that's the case you have to delete one of the actual used files and then load the new one. You can also delete the running image and load a new one. But you should make sure that no one cuts the power while upgrading ...
ā01-26-2018 02:37 AM
i entered to rommon and makes may pc as tftp and working with the asa fine . but when i make copy tftp disk ... the ERROR message shown that there is no space .
you can see this
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide