cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

329
Views
60
Helpful
25
Replies
Highlighted
VIP Advisor

Re: ASA5508 - ASDM User Accounts

Yes it should work on the outside interface.
You can also enable it on the management interface, if it was already enabled and you have a management network. I assume you are currently connected to the inside interface?
Highlighted
Beginner

Re: ASA5508 - ASDM User Accounts

When I try to go to the IP on a browser Outside of Network, I get the "Connection is not Private" warning, then when I proceed it says page cannot be found. What am I missing here? Thank you.

 

firewall8.pngfirewall9.png

Highlighted
VIP Advisor

Re: ASA5508 - ASDM User Accounts

Well it proves that you can at least access the login page, which is good!

Try appending /admin after the IP address. E.g:- "https://1.1.1.1/admin" - obviously replacing 1.1.1.1 with your IP address

 

If you already have ASDM installed then you don't need to open a web browser, you can just open ASDM set the IP address as the outside interface IP address and then login.

Highlighted
Beginner

Re: ASA5508 - ASDM User Accounts

It says I have to have some service contract to download ASDM. Is that the only way to get ASDM? Thank you.

 

firewall10.png

Highlighted
VIP Advisor

Re: ASA5508 - ASDM User Accounts

This is from the cisco website?
If you go to the ASA login page, e.g:- https://1.1.1.1/admin you download ASDM from there and then install on the computer. You do this only once, once installed you access ASDM directly.

I was querying whether you'd already done this on your computer, in which case ASDM would already have been downloaded and installed.
Highlighted
Beginner

Re: ASA5508 - ASDM User Accounts

I only have ASDM installed on my domain controller. I was wanting to put ASDM on 2 laptops for remote users but  am not able to access through browser as I mention earlier. I have tried just the https://ipaddress and also https://ipaddress/admin. Neither are working.

Highlighted
VIP Advisor

Re: ASA5508 - ASDM User Accounts

Can you try again from a different browser?
Are you accessing the webpage when connected to the outside of the ASA?
Highlighted
Beginner

Re: ASA5508 - ASDM User Accounts

I did get the login screen to come up in Internet Explorer. It is asking for my login credentials, then tries to install AnyConnect VPN. Is this normal? Is it because I did not put admin after the IP Address?

 

firewall11.png

 

 

Highlighted
VIP Advisor

Re: ASA5508 - ASDM User Accounts

What about when you append /admin? - https://1.1.1.1/ADMIN
Highlighted
Beginner

Re: ASA5508 - ASDM User Accounts

It is all working now. I was able to login with adding admin to end of ip address and download ASDM.

 

Thank you for all your help!

Highlighted
Hall of Fame Guru

Re: ASA5508 - ASDM User Accounts

ACLs are (generally speaking) for traffic going THROUGH the firewall - not traffic TO the firewall.

It's as @Rob Ingram said for allowing management traffic (which terminates on the firewall - i.e., TO the firewall).