I configured an ASA5512 with the integrated IPS software module. I am having issues connecting to the software module. The IPS software module is running and I have configured it for the same subnet as my inside interface. When I click on the IPS button within ASDM it prompts me for login and has the correct IP address info. However, after attempting to login with verified credentials it errors out the the following: "Error connecting to sensor. Error Loading Sensor."
I have verified settings multiple times. Is there something I'm missing? Do I need ACL's created? My firewall is running in transparent mode.
Radius server configuration for 802.1X
Server radius test1
Address ipv4 10.1.1.1
Server radius test2
Address ipv4 10.1.1.2
aaa group server radius TEST-gr
server name test1
server name test2
Umbrella’s cloud-delivered firewall (CDFW) is a cool features that provides Firewall Services in the Cisco Umbrella Cloud without the need to deploy on-premises firewall devices and visibility and control for internet traffic across all branch offices. To...
SymptomsDownloadable ACL (dACL) does not take effect on the IOS-XE Network Access DevicesDiagnosisCreating redirection ACL on the IOS-XE device failed to redirect the specified traffic for captive portal redirectionSolutionEnable device tracking, Below is...
Multiple Cisco Security Technologies in a single book : ASA Firepower, WSA, Umbrella, ISE and VPN with 100 percent 100 practical scenarios with 70 Labs to cover important topics of the Cisco SCOR Exam. The best part is ISE with interesting scenarios wi...