Hi All,
C2811 Router
|
C2960 L2 switch
| outside |
ASA -------- ASA
I am running a simple topology in my laborary for testing ASA 5516-X failover and it is running active/standby failover. I have tried to power off the active ASA and the standby ASA pick up the active role. After reloading the former active ASA, I found the outside monitored-interface is always shown "Failed (Waiting)". In the current active ASA, I can't ping the standby (10.10.241.4).
Finally, the problem can be resolved after shut/no shut the physical outside interface.
Is there any idea any problem is that. Thanks in advance
ASA# show monitor-interface
This host: Secondary - Failed
Interface outside (10.10.241.4): Failed (Waiting)
Interface inside (10.10.1.249): Normal (Monitored)
Other host: Primary - Active
Interface outside (10.10.241.3): Normal (Monitored)
Interface inside (10.10.1.248): Normal (Monitored)
