I have upgraded my Cisco ASA 5520 from 8.2 to 8.3, I have a monitoring sever sitting on my INSIDE interface which talks to various are network components and NAT's to 3 different interfaces on the ASA.
Having done some reading and testing I can see that PING traffic for example is appearing ok in the logs, upon further reading it seems that this issue may be down to security levels on my interfaces.
My question is do I need to run this command to resovle my issue
# same-security-traffic permit inter-interface
Currently my interfaces have different security levels however I can make them the same level?
IntroductionComponentsSupported EndpointsPrerequisitesWindows 10 Endpoint ConfigurationCisco ISE ConfigurationValidating the configuration with flowSolutions when Agentless Posture failsVerifying endpoint flow if Agentless Posture flow failsIssues & T...
hello, I am reviewing the External RESTful Services (ERS) Online SDK and there are several cases required to update file: WEB-INF/classes/com/cisco/cpm/ers/sdk-resources.properties, dose anyone know how to do it?
What is SecureX?
All AMP for Endpoints subscriptions include Cisco SecureX, which is built-in. SecureX is a cloud-native platform that turns your infrastructure into a fully integrated ecosystem, by aggregating capabilities across the Cisco Security port...