We have a ASA5525-SSD120-K9 that is now end of life but we installed firepower services on the SSD and believe we should now be supported as an ASA5525-FPWR-BUN How/Can do we change this with Cisco so we can continue with support? In our current setup the ASA5525-SSD120-K9 is end of life but we believe its just the CX that went end of life and not the actual ASA itself?
IntroductionPrerequisitesConfigurationVerify the configuration
With the enhancements in ISE 3.0 for integrating with Azure AD via SAML IdP, it is now possible to create a BYOD Flow to provide Wireless network access using an employee’s Azure...
The table below shows the whole Cisco Security solutions + Splunk integrations add-ons. Kindly let me know if I have missed some add-ons or if there are any new updates. Thank you!
Hope this will be helpful for everyone who is looking for Splunk in...
A python based script to generate report if there are disabled rules under an Access Control Policy and an option to delete those rules in bulk.
Step 1 Download the script on PCStep 2 Make sure python3 is installed on PC and have reach...
A python based script to generate report if there are double logging on FMC ACP (logging at beginning and end), having rule action "Allow" or "Trust". (Option1 )
Also, the logging at the begging will be disabled if logging is detected for both beginning ...
Meet the Authors Slides - CCIE Security in a Remote and Cloud Driven Network: SASE and Beyond
(Live event – Thursday, 29th, 2021 at 10:00 a.m. Pacific / 1:00 p.m. Eastern / 7:00 p.m. Paris)
This event had place on Thursday 29th, April 2021 at 10hrs P...