ASA5545-FPWR-K9

[KeyurPatel04355]

I have above fire wall and If I want to use this firewall with the Cisco ASR 1002-HX which comes all SFP+ Ports I need to change the Module SFP+ in the 

ASA5545-FPWR-K9. please advice which one is the model # should I look for it.

[Muhammad Awais Khan]

Hi,

You can use the GLC-TE= on your Router AS1002-X. This model is 1000-Base-T Transceiver. You can then connect your ASA5545 with ASR1002-X with 1000 Base-T Copper/UTP Cable.

If there is requirement to use Fibe only between Firewall and Router, then you need to add SFP Module on ASA5545 with this I/O Module "ASA-IC-6GE-SFP-C"

This module supports 6 Fiber/SFP Interfaces. After that, you need to add same type of SFP's on both end which can be GLC-LH-SMD='

[balaji.bandi]

If you get a chance to deploy and got a budget, i suggest to get new out of the box, rather module (this is my personal opinion), until this is branch router where there is no managing service available.

you can replace with FTD1XXX or 2XXXX