cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

307
Views
0
Helpful
0
Replies
Highlighted
Beginner

ASA55xx static and dynamic PAT for 1 address

Hi everyone!
I have the following topology:ASA transparent NAT.jpg

 

 

I need to give PC access to Internet, I also need to connect to it via RDP from outside. I have 1 public address.

How can I do it?

I thought it should be something like this:
hostname(config)# object network laptop_internet
hostname(config-network-object)# host 10.1.1.1
hostname(config-network-object)# nat (inside,outside) dynamic 5.5.5.5
hostname(config)# object network laptop_rdp
hostname(config-network-object)# host 10.1.1.1
hostname(config-network-object)# nat (inside,outside) static 5.5.5.5 service tcp 3389 3389

But I get the error message about using the same address twice.

ASA5585-X Version 9.6(2)23, I also tried on ASA5555 Version 9.6(3)3 - all the same

What's wrong and how can I realize this scheme?