cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

821
Views
0
Helpful
8
Replies
Erik Molnar
Beginner

ASDM - does not display all the rules

Hello,

we replaced our PIX525 firewall with an ASA 5540 firewall, and now we see some strange behavior in ASDM.

ASDM does not display all the rules, but i see all all the rules in cli.

What can be the problem?

inside-asa# show ver

Cisco Adaptive Security Appliance Software Version 8.2(5)

Device Manager Version 6.4(5)

1 ACCEPTED SOLUTION

Accepted Solutions

Hello Erik,

Do you think you can do an upgrade to 6.4(7) as this is the recommended version by CISCO when you are running 8.2(5).

Regards,

Julio

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC

View solution in original post

8 REPLIES 8
Julio Carvajal
Advisor

Hello Erick,

Are you talking just about the ACL rules?

Regards,

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC

Yes, just about the ACL rules. We does not use NAT because this firewall is an internal firewall.

 

 

Erik Molnar
Beginner

Hello,

I really need help.

Have somebody else find this problem?

Erik Molnar
Beginner

In addition, I noticed that the rules under CLI is have different order than the rules in the ASDM.

Hello Erik,

Do you think you can do an upgrade to 6.4(7) as this is the recommended version by CISCO when you are running 8.2(5).

Regards,

Julio

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC

View solution in original post

Sure, i think we can manage that but i can only reply after one or two weeks ( change management ).

But i thought that our ASDM version is OK with this ASA version, see the link,

http://www.cisco.com/en/US/docs/security/asa/asa82/release/notes/asarn82.html#wp309157

Thank you for you help.

Thanks for the help, we updated the ASDM software version on a test ASA firewall and everything is OK.

6.4.5(206) is OK too.

Hello Erik,

Great to hear that everything is working now.

Have a wonderful day,

Julio

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC
Content for Community-Ad