cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4205
Views
0
Helpful
16
Replies

asdm laucher problem on asa 5510

arekemase
Level 1
Level 1

Hi,

I am having problem lauching my asdm-633, when ever i types in the ip address of ASA5510 into the  browser, i found an error page 404. Below is my run:

:
ASA Version 7.0(6)
!
hostname SubASA
domain-name suburban
enable password AYWIUZP3a2RE5as1 encrypted
names
dns-guard
!
interface Ethernet0/0
nameif inside
security-level 100
ip address 10.10.10.5 255.255.255.0
!
interface Ethernet0/1
shutdown
no nameif
no security-level
no ip address
!
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
!
interface Management0/0
nameif management
security-level 100
ip address 192.168.2.15 255.255.255.0
management-only
!
passwd 2KFQnbNIdI.2KYOU encrypted
boot system disk0:/
ftp mode passive
pager lines 24
mtu inside 1500
mtu management 1500
asdm image disk0:/
no asdm history enable
arp timeout 14400
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00
timeout mgcp-pat 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
username SubsysASA password ZMbro4mkAe..eLHg encrypted
http server enable
http 192.168.2.0 255.255.255.0 management
http 192.168.1.1 255.255.255.255 management
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
telnet 192.168.2.0 255.255.255.0 management
telnet timeout 5
ssh timeout 5
console timeout 0
Cryptochecksum:b85119757d17d17efa98ef247656abd3
: end

Thanks in Anticipation?

16 Replies 16

Get the latest ASDM for the ASA code you are running.

There are known defects that are resolved:

CSCsx39786

CSCsv12681

ASA code: http://tools.cisco.com/squish/10C815

ASDM image: http://tools.cisco.com/squish/a5338C

Also check this link to troubleshoot the problem: https://supportforums.cisco.com/docs/DOC-13012

-KS

Hi,

I have resolved the issue by installing J2SE 5.0 Update 22.

It working like a  breeze now.

Thanks Guys!!!!!!!!!!!!!!!!!!!!!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card