I just switched from a Windows platform to a Linux platform. I have everything working well now. However I do have one problem, I am a reseller and travel to many many customers as well as remotely connect to many customer's gear.
I connected to our own ASAs and grabbed the asdm.jvsp file. However it has our ASA's IP Addresses hardcoded in it. I would like to be able to enter an IP address of the ASA I will connect to as opposed to forcing the connection to where I got the jvsp file and then choosing an additional ASA from the column on the left. Has anyone been able to do something similar to the ASDM Launcher?
As a workaround I am using VBox and running in seamless with the ASDM installed there, but not the optimal solution. Also, I am running CrossOver (Wine) and have Office 2007 installed and working but the ASDM says it installed under CrossOver but never creates the ICON.
Solved! Go to Solution.
OK OK the issues was that I was using the Open-Java as opposed to Sun Java. Even though I installed the Sun version, it still failed. In the launch file I specifically gave it the full path. Works like a champ now.
# Evoke ASDM-IDM Launcher on *NIX-based systems.
# Copyright (c) 2009 Cisco Systems, Inc.
# All rights reserved.
case "`uname`" in
exec /usr/java/jre1.6.0_21/bin/java -Xms64m -Xmx512m -XX:MaxNewSize=1024k \