03-30-2014 01:17 AM - edited 03-11-2019 09:00 PM
Hello,
ASDM was working perfect, sudeenly now i am not able to see source port, destination ip, destination port, as per the attached
, asdm image disk0:/asdm-635.bin
suggestion please.
Thanks
03-30-2014 06:57 AM
I haven't seen that particular issue before. It looks like you're logging at level 7 (debug) - that's very verbose and it might be overwheliming the ASDM log if your ASA is at all busy.
Can you see the information in the internal log buffer (not ASDM log) via the Monitoring > Logging section of ASDM?
Can you share "show run | i log"?
Also, it wouldn't hurt to upgrade ASDM to the current 7.1(4) release.
04-08-2014 01:07 PM
Dear marvin
There were a filter for the messages, I removed them and the logs were seen,
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide