ANNOUNCEMENT - The community will be down for maintenace this Thursday August 13 from 12:00 AM PT to 02:00 AM PT. As a precaution save your work.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

1100
Views
10
Helpful
40
Replies
Highlighted
Beginner

Re: ASK THE EXPERT- CISCO ADAPTIVE SECURITY APPLIANCE (ASA) 5500

Hi there

Yes, the Cisco ASA 5500 Series supports integration with market-leading URL filtering solutions from both Websense and Secure Computing/N2H2. Both of our partners solutions provide a broad range of advanced services for managing and monitoring Internet access. I know for certain that Websense allows you to create per-user bandwidth usage polcies using their "Websense Enterprise Bandwidth Optimizer" add-on. I'm not sure about about Secure Computing/N2H2 - you may need to check with them on that. Yes, you can create access control lists on the Cisco ASA 5500 Series that are based on time of day.

Hope this helps.

Regards,

Mike Jones

Highlighted
Beginner

Re: ASK THE EXPERT- CISCO ADAPTIVE SECURITY APPLIANCE (ASA) 5500

So the web filtering is from third party software as the PIX before. It is not build-in to ASA??? So the ASA itself has the URL-Filtering capability.

Highlighted
Beginner

Re: ASK THE EXPERT- CISCO ADAPTIVE SECURITY APPLIANCE (ASA) 5500

Hi there

Sorry for any confusion on this topic. Today we do not offer URL filtering services within the Cisco ASA 5500 Series itself. However, we do support integrating with leading URL filtering solutions from Websense and Secure Computing/N2H2, when those solutions are hosted on a separate server. Customers can configure their Cisco ASA 5500 Series appliance to hand URLs to the Websense or Secure Computing/N2H2 server (along with relevant user information, etc), and then ASA will enforce whatever answer the URL filtering solution sends back (permit or deny). Customers can use the URL filtering solutions GUI to create user/group-based URL filtering policies such as categories of sites their users can view, daily browsing limits, etc. These solutions also provide comprehensive reporting capabilities that give detailed insight into users browsing habits and wide range of statistics (top sites visited, etc).

I hope this further clarifies things for you.

Regards,

Mike Jones

Highlighted
Beginner

Re: ASK THE EXPERT- CISCO ADAPTIVE SECURITY APPLIANCE (ASA) 5500

Hi!

Regarding the Administration and Monitoring tools for Cisco ASA Series, can they be monitored using CiscoWorks VMS? I havent found a patch for the VMS in order to support ASA5500 Series.

I have heard that the ASA needs two separate administrative IP addresses, one for IPS funcionality and another for FW/VPN. Is that correct?

thanks,

Mario

Highlighted
Beginner

Re: ASK THE EXPERT- CISCO ADAPTIVE SECURITY APPLIANCE (ASA) 5500

Hi Mario

Good questions. Cisco and our AVVID partners offer a variety of applications to manage and monitor the Cisco ASA 5500 Series. One can look at this as four different categories of solutions: single device management, multi-device management, centralized monitoring, and auditing.

First of all, from a single device management standpoint, we provide an integrated web user interface called Cisco Adaptive Security Device Manager (ASDM for short). It provides comprehensive management and monitoring of a single Cisco ASA 5500 Series appliance (including services such as IPS that are delivered via an AIP SSM module - all from a single GUI). Of course you can also manage the system via CLI (which is nearly identical to the Cisco PIX CLI, just extended to support all of the additional services ASA offers). As you point out, the AIP-SSM module has its own CLI, but that is completely abstracted when you are using the web-based device manager. Other remote management features include SSH, telnet, and console/AUX access to the system. We also support the concept of an out-of-band management port, where all management traffic is required to go through. We support many methods for transferring files, like SCP, HTTP, HTTPS, FTP, and TFTP. Of course we also support SNMP, syslog, and SDEE for monitoring purposes.

Secondly, from a multi-device management standpoint there are at least two different solutions that I am aware of. We are in the process of updating CiscoWorks VMS to have full support for all the different services offered by the Cisco ASA 5500 Series. As you point out, this has not been released yet. We will be entering beta soon with this solution - if you are interested in beta testing, please contact your Cisco account team and let them know. Solsoft, one of our AVVID program partners, has updated their Policy Server product to manage the firewall, IPSec VPN, and IPS services of the Cisco ASA 5500 Series. So that is another alternative you could consider.

From a monitoring perspective, there are many solutions available. Cisco offers at least two solutions, the primary being our Cisco MARS solution. This is a great monitoring solution that takes events in from all of our different security and networking products, as well as events from third-party firewall, IPS, etc products. There are also over 10 different monitoring solutions from our different AVVID partner program members as well. So plenty of options here, and I'm sure at least one of these will fit your needs.

From an auditing standpoint, the new Cisco Security Auditor product also fully supports the Cisco ASA 5500 Series. This product can help customers deal with regulatory compliance and ensure that devices throughout their network are following corporate security policies and industry best-practices. It can perform audits either online or offline, and will basically look at device configurations and compare them to policies that you have set or compare them to industry best practices. It has a variety of reporting capabilities as well to roll-up the audit results.

So I think this sums up management of the Cisco ASA 5500 Series. I hope this clarifies things for you.

Regards,

Mike Jones

Highlighted
Beginner

Re: ASK THE EXPERT- CISCO ADAPTIVE SECURITY APPLIANCE (ASA) 5500

following instructions for password recovery for pix and the interface will not initialize

Highlighted
Beginner

Re: ASK THE EXPERT- CISCO ADAPTIVE SECURITY APPLIANCE (ASA) 5500

Sorry to hear you are having problems with password recovery. From the small amount of information you have provided, my guess would be that the configuration of your Cisco ASA 5500 appliance had the "no password recovery" command in it prior to you performing the procedure. If this command is present when someone performs a password recovery procedure, we will wipe out the configs stored on flash as well as any encryption keys/certificates stored on the device. This is a security feature designed to protect the configuration and encryption keys from unauthorized use. So when you reboot after performing the password recovery procedure, in this scenario, no interfaces will be defined. You can connect via the console cable to get the system going, and can copy a backup of your config to the device or re-create your config as needed. You can use the "configure factory-default" command to reset the configuration back to the defaults we ship the product with.

I hope this helps. If you still have questions, please contact the TAC.

Regards,

Mike Jones

Highlighted
Beginner

Re: ASK THE EXPERT- CISCO ADAPTIVE SECURITY APPLIANCE (ASA) 5500

Hi everyone

I wanted to take a minute and thank all of you for the great questions you asked during this Ask the Expert session for the Cisco ASA 5500 Series. I think we covered a lot of ground, and I hope this helped you better understand this exciting new product family. Please let your Cisco account team or Cisco partner know if you have any further follow-up questions.

Best wishes,

Mike Jones

Highlighted
Beginner

Re: ASK THE EXPERT- CISCO ADAPTIVE SECURITY APPLIANCE (ASA) 5500

Hi ciscomodirator,

I am about to recommend an ASA appliance for my customer. I am considering ASA5510-SEC-BUN-K9 or ASA5520

-BUN-K9. The customer requires the following features:
  • ·    Firewall / NAT

  • VPN (Any Connect, SSL VPN, IPSEC)
  • AS / AV Scanning
  • Web/Application Content Filtering (including HTTPS Scanning)
  • QOS / Bandwith Management/allocation
  • ·     Multi-Link Management (i.e. ability to have multiple ISPs links into same device

  • ·     Authentication (user, IP, and mac address)

  • About 150 users
    My Questions are:
    1. Which of these platform should be recommended to the customer ASA5510-SEC-BUN-K9 or ASA5520-BUN-K9?
    2. Will the customer be able to satisfy the above listed requirements?
    3. If yes to 2 above, could someone please list out of the box features for me?
    4. If no to 2 above, which of the adove listed features requires the customer to purchase a licence?
    5. Do they need to licence the box to be able to use the features that came with the box or they can just deploy the box as soon as the recieves it?

    I will really be greateful if I could get anwsers to these questions as soon as possible because it is very urgent.

    thank you in advance.
    Highlighted
    Beginner

    Re: ASK THE EXPERT- CISCO ADAPTIVE SECURITY APPLIANCE (ASA) 5500

    I recently purchased the license for AnyConnect Mobile for my ASA5510 which has an existing SSL VPN license for 10 concurrent users. When I activated the key for the AnyConnect Mobile license on the ASA5510, it disabled the SSL VPN license and reduced the concurrent users to the default 2. Is this a bug in ASA5510 or did I get the wrong license key from Cisco?

    Thanks.

    Highlighted

    Re: ASK THE EXPERT- CISCO ADAPTIVE SECURITY APPLIANCE (ASA) 5500

    Hi Michael,


    Can you give me the live log formatt for the below ID's for Cisco ASA 5500 Version 8.3(X).
    These are the few log ID's which are added on the new version as we are planning to upgrade
    our older version we need a clear idea about the logs and its exposure..,

    113028,211004,324008,414005,414006,414007,414008,604105,711002,713201,713260,

    713261,713262,713263,713264,713265,713266,713267,713268,713269,713270,713271,

    713272,713273,713274,713905,713906.


    %ASA-7-713906: descriptive_event_string.

    I have the Synthetic log formatt for the above ID's.